Symbol-technologies MC9000-K User Manual download pdf (Page 297)

100

101

Accessories

7-41

The CAM:

• Provides mobile computer’s operating power and battery charging power when used with

the Symbol approved power supply and cable.

• Provides serial connection through the serial pass-through port for communication with a

serial device, such as a host computer. For communication setup procedures, see Serial

Communications Setup on page 4-10.

• Provides USB connection through the USB pass-through port for communication with a USB

device, such as a host computer. For communication setup procedures, see USB Connection

Setup on page 4-13.

CAM and MSR Communications Setup

Both the CAM and MSR can be set up to communicate either with a serial connection or a USB

connection and both devices use the same setup procedure. For detailed communications setup

procedures, see Communication Setup on page 4-9.

1. On the mobile computer double-tap the Ctl Panel icon and double-tap Comm Settings to

enter the Comm Settings, window.

Figure 7-28. Comm Settings Window

2. With Port highlighted, use the left and right arrow buttons to select the value.

Select the Comm port setting appropriate for the host computer, choose the default value of

USB, or set to Serial1 @ 115200.

3. Tap OK to exit the Comm Settings window and tap Exit to exit the Control Panel window.

4. Ensure that ActiveSync was installed on the host computer and a partnership was created.

See Installing ActiveSync on page 4-3 and Setting up a Partnership on page 4-4.

1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 533 534

Comments to this Manuals

No comments

Symbol-technologies MC9000-K User Manual Page 297

Comments to this Manuals