Symbol-technologies MC9000-K User Manual download pdf (Page 273)

100

101

Accessories

7-17

Setup

Table 7-2 lists the requirements for setting up and using the VCD9000.

Table 7-2. VCD9000 Setup Requirements

Feature Requirements

Mounting (See page 7-18) Four 8-32 X 1” long screws with locking washers (provided as part of the

cradle).

Four #8 washers recommended.

A drill with a #6 drill bit (0.204”).

Power Connection (See page 7-20)

For continued protection

agains risk of fire, replace only

with same type and rating of

fuse according to the input

voltage used.

Power input cable (provided) connects to vehicle power.

UL-listed in-line fuse rated 4A or 5A (both included), must be used if not

connecting to vehicle’s fuse panel.

For 12 V operation use UL-listed 5A fuse (included).

For 24 V operation use UL-listed 4A fuse (included).

In-line fuse holder (included), must be used if not connecting to vehicle’s

fuse panel.

Serial Connection (See page 7-23) DB9 female serial cable (some external devices require a null modem

cable). The port is a Standard RS-232 for direct connection to a serial

device.

Communication An MC9000 Series mobile computer.

Setup of mobile computer and external device (as determined by the

application used).

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 533 534

Comments to this Manuals

No comments

Symbol-technologies MC9000-K User Manual Page 273

Comments to this Manuals