Symbol-technologies MC9000-K User Manual download pdf (Page 168)

100

101

MC9000-K/S for Embedded Windows® CE .NET Product Reference Guide

4-10

Serial Communications Setup

The serial communications setup can be used to set up to communicate with a Single Slot Serial/USB

Cradle, MSR or a CAM.

For serial communications using the Single Slot Serial/USB Cradle, connect

only the serial cable, do not connect both the serial cable and the USB cable.

If both serial and USB communications cables are required, the host

computer USB port must be disabled in ActiveSync before serial

communications can be enabled.

Serial Connection Setup

1. On the mobile computer double-tap the Ctl Panel icon and double-tap on Comm Settings

to enter the Comm Settings, window. For detailed procedures, see Comm Settings on page

3-56.

Figure 4-8. Comm Settings Window

2. With Port highlighted, use the left and right arrow buttons to select the value.

Comm port default value is set to USB, change the value to: Serial1 @ 115200 (or a serial

setting appropriate for the host computer).

3. Tap OK to exit the Comm Settings window and tap Exit to exit the Control Panel window.

4. Ensure that ActiveSync was installed on the host computer and a partnership was created.

See Installing ActiveSync on page 4-3 and Setting up a Partnership on page 4-4.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 533 534

Comments to this Manuals

No comments

Symbol-technologies MC9000-K User Manual Page 168

Comments to this Manuals