Symbol-technologies AP-5131 User Manual Page 510
- Page / 578
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
AP-5131 Access Point Product Reference Guide
9-14
mesh network data from those client bridges within the mesh network and never the
initiator.
4. If the Base Bridge checkbox has been selected, use the Max# Client Bridges parameter
to define the client bridge load on a particular base bridge.
The maximum number of client bridge connections per AP-5131 radio is 12, with 24
representing the maximum for dual-radio models.
Once the settings within the Radio Configuration screen are applied (for an initial
deployment), the current number of client bridge connections for this specific radio displays
within the CBs Connected field. If this is an existing radio within a mesh network, this
value updates in real-time.
5. Select the Client Bridge checkbox to enable the AP-5131 radio to initiate client bridge
connections with other mesh network supported AP-5131s radios on the same WLAN.
CAUTION A problem could arise if a Base Bridge’s Indoor channel is not
available on an Outdoor Client Bridge's list of available channels. As
long as an Outdoor Client Bridge has the Indoor Base Bridge channel
in its available list of channels, it can associate to the Base Bridge.
CAUTION An AP-5131 is Base Bridge mode logs out whenever a Client Bridge
associates to the Base Bridge over the LAN connection. This problem
is not experienced over the AP-5131’s WAN connection. If this
situation is experienced, log-in to the AP-5131 again.
!
!
- AP-5131 Access Point 1
- Product Reference Guide 3
- Contents 7
- Chapter 3. Getting Started 9
- Chapter 5. Network Management 10
- Appendix C. Customer Support 14
- About This Guide 15
- Notational Conventions 16
- Service Information 16
- AP-5131 Introduction 17
- 1.1 New AP-5131 Features 18
- 1.1.2 Additional LAN Subnet 19
- 1.1.4 Hotspot Support 20
- 1.2 Feature Overview 22
- 1.2.8.2 EAP Authentication 26
- 1.2.8.3 WEP Encryption 27
- 1.2.8.4 KeyGuard Encryption 28
- 1.2.9 VLAN Support 29
- 1.2.11 Updatable Firmware 30
- 1.2.15 Voice Prioritization 32
- 1.2.17 Statistical Displays 32
- 1.2.18 Transmit Power Control 33
- 1.3 Theory of Operations 34
- 1.3.1 Cellular Coverage 35
- 1.3.2 MAC Layer Bridging 36
- 1.3.3 Media Types 37
- 1.3.5 MU Association Process 38
- 1.3.6 Operating Modes 39
- Hardware Installation 41
- 2.1 Precautions 42
- 2.2 Package Contents 42
- 2.3 Requirements 44
- 2.4 Placement of the AP-5131 44
- 2.4.1 Site Surveys 45
- 2.4.2 Antenna Options 45
- 2.5 Power Options 48
- 2.7 Mounting the AP-5131 51
- Light Pipe 59
- Ceiling Tile 59
- 2.8 LED Indicators 60
- Data Over Ethernet 61
- 802.11a Radio Activity 61
- 802.11b/g Radio Activity 61
- 2.9 Setting Up MUs 62
- Getting Started 63
- 3.2 Configuration Options 64
- 3.5.2 Testing Connectivity 75
- 3.5.3 Where to Go from Here? 76
- AP-5131. Symbol recommends 79
- AP-5131. The System Location 79
- 4.2 Configuring Data Access 82
- 4.4 Configuring SNMP Settings 93
- Feature MIB Feature MIB 94
- SNMP v3 user definitions 97
- SNMP access 100
- 4.4.2 Enabling SNMP Traps 101
- System Configuration 103
- ’s WLANs 104
- 4.6 Logging Configuration 111
- 4.8 Updating Device Firmware 117
- Option Code Data Type 119
- Network Management 125
- AP-5131 network address 133
- 5.2 Configuring WAN Settings 138
- AP-5131 to auto-select the 174
- AP-5131 802.11a radios 174
- QoS values for the radio 176
- AP-5131 are 176
- 6.2 Setting Passwords 189
- New Security Policy screen 192
- AP-5131, other 203
- AP-5131. To 216
- 6.10.1.1 Available Protocols 217
- 6.11 Configuring VPN Tunnels 220
- For example: 227
- AP1 Inbound SPI = 800 227
- AP1 Outbound SPI = 801 227
- AP-5131 end of the SA 232
- AP-5131 end of the tunnel 232
- 6.11.4 Viewing VPN Status 234
- AP-5131 235
- AP-5131’s WAN port 238
- AP-5131 access point. The 241
- AP-5131 conducting a scan 241
- Add to Allowed APs List 243
- Details button 244
- 4. Refer to the 245
- Delete-> button 258
- Monitoring Statistics 261
- 7.1 Viewing WAN Statistics 262
- AP-5131 WAN 263
- AP-5131 was last restarted 264
- 7.2 Viewing LAN Statistics 266
- AP-5131. For 272
- 7.3.1 Viewing WLAN Statistics 273
- 7.4.1.1 Retry Histogram 282
- 7.5.1 Viewing MU Details 285
- AP-5131 at that data rate 286
- 7.5.2 Pinging Individual MUs 287
- 8.1 Connecting to the CLI 295
- 8.2 Admin and Common Commands 297
- AP5131>admin>help 298
- AP5131>admin>passwd 299
- AP5131>admin>summary 300
- AP5131>admin> 301
- AP5131>admin> / 302
- AP5131>admin>save 303
- AP5131>admin>quit 304
- 8.3 Network Commands 305
- 8.3.1 Network LAN Commands 306
- Description: 307
- Syntax: 307
- Example: 307
- WINS Server : 192.168.0.255 308
- Related Commands: 309
- Syntax: 320
- 8.3.2 Network WAN Commands 333
- 8.3.3.1 Network WLAN Commands 352
- 8.3.3.3 Network ACL Commands 374
- Descripton: 399
- 8.3.5 Network Router Commands 419
- 8.4 System Commands 425
- 8.4.2 System Access Commands 430
- Description: ) 435
- 8.4.4 System SNMP Commands 446
- 8.4.6 System Log Commands 463
- 8.5 Statistics Commands 480
- Configuring Mesh Networking 497
- 9.1.5 Normal Operation 501
- Technical Specifications 539
- A.1 Physical Characteristics 540
- A.3 Radio Characteristics 541
- A.4 Antenna Specifications 542
- A.5 Country Codes 544
- AP-5131 Usage Scenarios 547
- B.1.1.3 DHCP Priorities 551
- B.1.2.1 BootP Options 553
- B.1.2.2 BootP Priorities 555
- Customer Support 567
- North American Contacts 568
- International Contacts 568
- Web Support Sites 569
- Additional Information 569
- Symbol Technologies, Inc 578
- One Symbol Plaza 578
- 72E-94168-01 578
- Revision A - November 2006 578
Related products and manuals for Hardware Symbol-technologies AP-5131
(37 pages)© 2020, manymanuals.com. All rights reserved. | 5.791 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals