Symbol-technologies AP-5131 User Manual download pdf (Page 51)

100

101

Hardware Installation

2-11

2.7 Mounting the AP-5131

The AP-5131 can rest on a flat surface, attach to a wall, mount under a suspended T-Bar or above a

ceiling (plenum or attic). Choose one of the following mounting options based on the physical

environment of the coverage area. Do not mount the AP-5131 in a location that has not been approved

in a site survey.

Refer to the following, depending on how you intend to mount the AP-5131:

• Desk Mounted Installations

• Wall Mounted Installations

• Suspended Ceiling T-Bar Installations

• Above the Ceiling (Plenum) Installations

2.7.1 Desk Mounted Installations

The desk mount option uses rubber feet allowing the unit to sit on most flat surfaces. The four (4)

round rubber feet can be found in the AP-5131 (main) box in a separate plastic bag.

To install the AP-5131 in a desk mount orientation:

1. Turn the AP-5131 upside down.

2. Attach the radio antennae to their correct connectors.

The antenna protection plate cannot be used in a desk mount configuration, as the plate only

allows antennas to be positioned in a downward orientation.

3. Remove the backings from the four (4) rubber feet and attach them to the four rubber feet

recess areas on the AP-5131.

CAUTION Both the Dual and Single Radio model AP-5131’s use RSMA type

antenna connectors. On the Dual Radio AP-5131, a single dot on the

antenna connector indicates the primary antenna for both Radio 1 (2.4

GHz) and Radio 2 (5.2 GHz). Two dots designate the secondary

antenna for both Radio 1 and Radio 2. On Single Radio models, a

single dot on the antenna connector indicates the primary antenna for

Radio 1, and two dots designate the secondary antenna for Radio 1.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 577 578

Comments to this Manuals

No comments

Symbol-technologies AP-5131 User Manual Page 51

Comments to this Manuals

Related products and manuals for Hardware Symbol-technologies AP-5131